NEWS CENTER
High shear broken pump cut broken ground and mixed transport Four
High shear broken pump a wide range of applications, energy-saving effect, simple and easy to use, and no vibration, no noise and other characteristics by domestic and foreign users of the pro-Lai.
Broken pump is a high shear fragile materials for a variety of cutting crushing, grinding grinding, mixing, transportation and other Snap is a multifunctional new wet grinding technology patents. The device is particularly suitable for crystals of various materials, aggregate, dining table garbage, manure and other fragile particles for high-speed cutting, crushing delivery, instead of the pump can be directly used.
The main structure of high shear broken pump
Rotor and stator high shear broken pump main structure: the high-speed motor, connect several parts of the device, the casing and other components. Casing setting outlet flanges, pump working chamber by Crescent, two-piece cutter, cut four-leaf double-edged sword, big Kongding Zi, leafy double-edged cutting blade, small Kongding Zi, centrifugal fan knife and refinement knife devices and other components. Optional blade material: 304, 316L, 2205, 2Cr13. Housing Material: 304, 316L. Feed friable particles may be about 20-40mm. The cutting blade and the aperture plate is thick 孔定子 aperture is generally about 8-20mm, in 孔定子 aperture of about 3-5mm, thinning out about 0.5-2mm optional feeding device, the size of the material particles is based on user needs The design, the material particles in general about ≤2mm, the solid content of the material does not exceed about 30%.
The main function of the high shear broken pump
High shear broken pump main features: is carried out for the object, caking, dough and other solid materials as well as semi-fluid high-speed cutting, crushing grinding, crushing refinement. The main process is the solid, liquid material in large particles prior crescent knife and two strong cutting knife, and then redistributed to have a double-edged knife with a four-leaf Kong Dingzai high-speed large force into the next cut after cut process from the big negative out of the particle Kong Dingzai has been caught in the large and small Kong Dingzai double-edged blade in the middle of the six-bladed high shear crushing of six double-edged blade leaves it features: two-way shear crushing mainly plays on Cut from the big hole down materials, thin under shear to enter Kong Dingzai material, we are still fine Kong Dingzi following multi-piece design centrifugal blade cut again broken down material from the hole, and finally reach the required fineness objects by refining means delivery centrifugal way out.
High shear broken pump Features
(1) there is a strong grinding, dispersing, emulsifying, transport function, continuous operation and does not affect the life of the equipment clearance operation
(2) Quiet design, easy installation, balancing, and no vibration, no noise, sealing optional double (single) plane mechanical seal
(3) blade material can be used 304,316L, 2205,2Cr13, can nitriding or tungsten carbide infiltration process
(4) high shear rotor and stator is generally broken pump type A, B type two sizes available
A, A type: Cutting transport S-type, this type of material particles around 1-6mm, maximum lift up to 60 m
Two, B type: Cut smash X-type, the type of material particles around 0.4-3mm, maximum lift up to 30 m
High shear broken pump technology parameters
Model capacity ? / h Motor Power kw Importers dimensions mm mesh size mm Note:
The amount of processing in this table, only to water as a medium, the material must be friable particles, the amount of processing the table is a solid content of about 5%. The size and the amount of processing power of the motor is determined based on the material medium
SRH-S40A 4-8 7.5 80/40 1-3
SRH -X40B 1-3 7.5 80/40 0.4-1
SRH -S50A 10-15 15 100/50 1-3
SRH -X50B 5-10 11 100/50 0.4-1
SRH -S65A 10-20 30 125/65 2-5
SRH -X65B 8-15 22 125/65 0.6-1.5
SRH -S80A 20-30 37 150/80 3-6
SRH -X80B 10-20 30 150/80 0.8-2
SRH -S100A 30-40 45 150/100 3-6
SRH -X100B 20-30 37 150/100 0.8-2
NOTE: The motor power according to the hardness of the material viscosity and particle configuration.
copyright © 2022 Zhejiang Hao Star Machinery Equipment Manufacturing Co., Ltd all rights reserved
Tel 0577-86999999 技术支持:优谷科技